Control Panel Function | Under/over generator frequency | GENERATOR
Protection Circuit Failed to reach loading voltage Voltage (L-N)
WARNING ELECTRICAL TRIP Current(L1-L2-L3)
Battery charge failure Generator over current Frequency
Low battery voltage Instruments AMAINS
SHUT DOWNS ENGINE Voltage (L-L, L-N)
Fail to start Engine speed Remote start
Emergency stop Oil pressure Loads share
Low oil pressure Coolant temperature Parallel operation
High engine temperature Run time
Over /Under speed Battery volts

---

All Control Panel »

DSE8610 Synchronising & Load Sharing Control Module:

The DSE8610 MKII is an easy to use Synchronising Auto Start Control Module suitable for use in a multi-generator loadshare system, designed to synchronise up to 32 generators including electronic and non-electronic engines. The DSE8610 MKII monitors the generator and indicates operational status and fault conditions, automatically starting or stopping the engine on load demand or fault condition.

System alarms are annunciated on the LCD screen (multiple language options available), illuminated LED and audible sounder.

The event log will record 250 eventsto facilitate easy maintenance, and an extensive number of fixed and flexible monitoring, metering and protection features are included.

Designed to offer increased built in support for active sensors for 0 V to 10 V & 4 mA to 20 mA.
Comprehensive communication and system expansion options are available.

Using the DSE PC Configuration Suite Software allows easy alteration of the operational sequences, timers and alarms. With all communication ports capable of being active at the same time, the DSE8610 MKII is ideal for a wide variety of demanding load share applications.

KEY FEATURES & BENEFITS

1. Mains (utility) failure detection
2. Comprehensive synchronising & loadsharing capabilities
3. Built-in governor and AVR control
4. Base load (kW export) functionality
5. Positive & negative kVAr export control
6. Peak lopping & shaving functionality
7. Mains (utility) power (kW, kV Ar, kV A & pf) monitoring
8. Mains (utility) de-coupling protection
9. Generator power (kW, kV Ar, kV A & pf) monitoring
10. Overload (kW & kV Ar) protection
11. Reverse power (kW & kV Ar) protection
12. Mains (utility) kW export protection
13. Unbalanced load protection
14. Independent earth fault protection
15. Advanced integral PLC editor
16. 11 Configurable inputs
17. 8 Configurable outputs
18. Configurable flexible sensor inputs
19. DSENet ® expansion compatibility
20. User configurable RS232, RS485 and Ethernet communications via USB
21. 4 Line back-lit LCD text display
22. LED and LCD alarm indication
23. Configurable display languages
24. USB connectivity
25. Customisable status screens
26. Five key menu navigation
27. 3 Configurable maintenance alarms
28. Multiple date and time run scheduler
29. Manual fuel pump control
30. Fuel usage monitor and low fuel level protection
31. Charge alternator failure protection
32. Load switching (load sheddingand dummy load control)
33. Configurable event log (250)
34. Backed up real time clock
35. Remote SCADA monitoring via various DSE software applications
36. MODBUS RTU & TCP support
37. User configurable MODBUS Pages
38. Advanced SMS control and fault messaging (additional GSM modem required)
39. Easy access diagnostic pages including modem diagnostic pages
40. Data logging and trending
41. CAN, MPU and Frequency speed sensing
42. Tier 4 CAN engine support
43. 'Protections disabled' feature
44. Front panel editing with PIN protection
45. Fully configurable using DSE Configuration Suite PC software

KEY BENEFITS

1. Compatible with DSE8003
2. 132 x 64 pixel ratio display for clarity
3. Real-time clock provides accurate event logging
4. Ethernet communication, provides builit in advanced remote monitoring.
5. Can be integrated into building management systems (BMS) and programmable logic control (PLC)
6. Increased input and output expansion capability via DSENet ®
7. Licence-free PC software
8. IP65 rating (with supplied gasket) offers increased resistance to water ingress
9. Advanced Internal PLC editor allows user configurable functions to meet specific application requirements.

AGC 150

AGC 150 is a controller containing all necessary functions for protection and control of a genset, a mains breaker, and a bus tie breaker. It can be used as a single controller for one genset, or a number of controllers can be connected in a complete power management system for synchronising projects, island applications or running parallel to mains.
AGC 150 is an economical solution for genset builders, who need a flexible generator protection and controller for small to large genset applications. AGC 150 contains all necessary 3-phase measuring circuits, and all values and alarms are presented on the sunlight readable LCD display screen

Easy setup
Gensets connected via CAN bus are easily set up for parallel operation as the controllers automatically detect each other at the CAN network. If you at a later stage connect more gensets, the controller automatically identifies and connects them via CAN bus, and application configuration is possible via the display.

Easy and safe to use
Get access to important genset information quickly via the sunlight readable LCD. The controller features illuminated buttons that smoothly guide the operator and make it very easy and intuitive to operate. Only buttons relevant for a function are visible to the user. Get easy access to the most common functions with configurable shortcuts.

The AGC 150 provides up to three levels (customer, service, and master) of password-protected and role-based access. Configure parameters for each level and have only relevant parameters displayed.
Built to last - also in green energy applications. The AGC 150 comes with uncompromising quality. The controller is made of robust materials and is built to last. It has undergone several tests showing that it stands wear and tear in all types of harsh environments. Also, the controller is suitable for PV-Diesel hybrid solutions and also meets Tier 4 Final requirements

Genset controller features

1. -40 degree support
2. Adapting controls (Controllers show only relevant buttons)
3. Additional I/O modules support (CANbus based CIO)
4. Analog Inputs / Analog Outputs
5. Analog inputs support resistance, current and voltage
6. Analogue loadshare
7. AOP 2 support
8. Automatic Mains Failure sequence
9. CAN telegrams between controllers
10. Changable operation mode (multiple modes in one software DEIF PMS ecosystem compatible with AGC-4, AGC-4 Mk II, AGC 150, AGC 200, ASC-4
11. Digital & analog governor support (Isochronous and droop)
12. Emission control with force regeneration and SOOT alarm
13. Emulation for easy training and FAT
14. Engine CANbus
15. Engine derate functionality
16. Ethernet
17. Changeable controller type
18. Close Before Excitation / Run-up synchronization from 6 seconds
19. DEIF digital AVR DVC550 support
20. Tier4 final/stage5
21. UL approved
22. Front mount
23. Fuel pump logic (after filler)
24. Hybrid EMS support (via ASC-4)
25. Inputs/ Outputs
26. Inverse time over-current (ANSI 51) False
27. Load add/ shedding support
28. Load control and Heavy consumer support (via ALC-4)
29. Multi purpose PID
30. Multi-master Power Management
31. PLC logic
32. RS485
33. Synchronization